How to solve the problem of oil leakage in non-standard hydraulic cylinders

After the non-standard hydraulic cylinder is used for a long time, it will show oil and water leakage more briefly. At this time, we need to learn how to stop the leakage in time. In addition, in the field operation, spare parts should be equipped with more spare parts for use.

       When the non-standard hydraulic cylinder is in operation, if the situation suddenly occurs, then we need to learn to repair it. Now we will introduce some content in this area, hoping to provide you with reference. For unexpected situations, we can choose a simple remedy in order to resume work as soon as possible.

       The oil cylinder has been used for a long time, and oil leakage may also occur. Therefore, in some cases, emergency measures need to be selected. For example, some steel cylinders used for tunnel construction may have leakage problems due to limited working space. At this time, we can use epoxy resin subsidies or use soap to modify and block.

       If the problem is greater, for example, when a perforation occurs, a wooden plug will block the perforation and, if necessary, tie it with a wire or rope. Assuming that the hydraulic cylinder leaks due to loose pipe joints, use the original tape with the supplied tape to wind 3-5 times around the thread, and then tighten it. If the hardness of the cylinder barrel changes, it is likely to be formed during the boring process, the tool wear will increase, and even the tool cutting conditions will be poor, resulting in waste. In addition, when the floating boring tool is used for processing, the quality of the inner hole will also be affected.

       The assumption that requires attention is the on-site operation of the cylinder, so prepare the replacement of spare parts in advance. Especially the seals and some simple wearing parts, assuming timely replacement, better results can be achieved. After all, according to the shortcomings of non-standard hydraulic cylinders, appropriate measures should be selected in combination with the actual situation. It can quickly make the operation normal after repair.