|
What are the factors that affect the operation of hydraulic cylindersAt present, during the operation of hydraulic cylinders, mechanical failure problems are often caused by seal wear, cylinder bore wear, inner wall corrosion, and piston rod scratches. Moreover, the sealing performance of hydraulic cylinder actuators may directly affect the operating performance of the equipment. So, what are the main factors affecting hydraulic cylinders? One, oil cleanliness The cleanliness of the system oil will have an important effect on the hydraulic cylinder. For example, if the cleanliness of the oil is not ideal or does not meet the requirements, it will cause serious damage to the components or pipelines of the entire hydraulic cylinder system. Therefore, the user must select and apply the working medium, and at the same time, the user also needs to do a good job in the filter design of the hydraulic cylinder. 2. Hydraulic shock and vibration Hydraulic cylinders will be affected by the performance of components, pipelines, and medium characteristics during work, which is accompanied by hydraulic shock and vibration. However, the shock and vibration of the hydraulic cylinder can easily loosen the connection between the components and the pipeline, so that the damage to the equipment pipeline increases and causes the hydraulic oil to leak. Therefore, when users buy hydraulic cylinders, they should choose equipment and components that use hydraulic buffer technology. Three, oil temperature If the oil temperature is too high or too low, it will have a great impact on the working efficiency of the cylinder. If the oil temperature is too high or too low, the physical and chemical properties of the medium will change, causing the viscosity of the working medium to decrease or the possibility of leakage increases. At the same time, the oil temperature is too high or too low, which may also cause the accelerated damage of the seal and the deterioration of the yuan. Therefore, the user should control the oil temperature of the equipment during the operation of the hydraulic cylinder and take different measures to ensure the proper oil temperature. In addition, the cylinder is also affected by the connection and installation of different components in the system. Therefore, the user must do a good job in the connection between the hydraulic cylinder motor and the pump, and the stability between the system pipelines and between the pipelines and the oil ports. |